Rose of Sharon
7 people love this


Finished Quilt Size 100" x 100"
Rose of Sharon Block Pattern

FABRIC REQUIREMENTS
Based on fabric 44" wide
Background ... 9 3/4 yards
Dark Pink ... 1 1/3 yards
Light Pink ... 2/3 yard

 Gold ... 1/4 yard
Yellow ... 1/4 yard
Green ... 2 1/3 yards
Binding ... 1 yard for "bias" cut strips

CUTTING INSTRUCTIONS
Background ... Color #1
... Cut 13 squares 18" x 18"
... Cut 12 squares 16 1/2" x 16 1/2"
... From lengthwise grain, cut 4 border strips 10" x 105" long

Dark Pink ... Color #2
... 2A - Cut 72 Template A (Includes buds for border)
... 2C - Cut 48 Template C
Light Pink... Color #3
... 3C - Cut 48 Template C

Green... Color #4
... 4B - Cut 120 Template B (Includes leaves for border)
Gold... Color #5
... 5D - Cut 12 Template D
Yellow... Color #6
... 6E - Cut 12 Template E
Binding ... Cut strips 2 1/2" wide for doubled binding


ASSEMBLY INSTRUCTIONS


Assembly Diagram

Quilt Assembly Diagram

 

Step 1. Using block instructions, make 13 Rose of Sharon blocks.

Step 2. Referring to the Assembly Diagram, alternate appliquéd blocks with solid background blocks and assemble rows "block to block".

Step 3. Miter border strips to assembled patchwork.

Step 4. Appliqué border motifs (Placement Guide HTML or PDF) to borders, using block seams as a guide when aligning motifs along the border strip. Refer to quilt diagram when appliquéing motifs on corners.

Step 5. Mark quilting design of your choice on quilt top. (Suggested "block" quilting design ... HTML.) Baste layers together, quilt and then bind to finish up.


 

"ROSE OF SHARON" Quilting Designs

16

After printing use a copy machine to reduce or enlarge the design. Use measurement lines as a guide for correct size.
Making Full Quilting Design: Cut a paper square 17" x 17". Draw a line vertically and horizontally from side to side and top to botton, through the center. Aligning solid lines, trace the above design onto the paper for each quadrant. After finishing the drawing, transfer the design to the fabric, using method of choice.
(See "Transferring Quilting Designs")


Transferring Quilting Designs

MAKING QUILT LABELS

  • Always identify your quilts. Attach a label that tells who, when, where, and any other pertinent information you may want to add.
  • Reduce or enlarge the design, using a copy machine, to make any size label.
  • Trace motif onto fabric of your choice using a permanent, waterproof pen. Trace outside line using a washable marking pencil of your choice. (Appliqué guideline)
  • Cut fabric 1/4" away from traced line for seam allowance.

Tip: Cut a piece of freezer paper larger than the label. Press paper, using a dry iron, to the wrong side of the fabric, shiny side against fabric. Trace the design. The paper will help to make the process of tracing the lines easier. After design has been traced, remove the paper.

TRANSFERRING QUILTING DESIGNS

  • Reduce or enlarge the designs, using a copy machine, to fit any size border or block.
  • Trace designs onto light colored fabric using a light box or glass top table with light source. If lines on the paper are difficult to see, darken the lines using a permanent pen.
  • Punch holes along the design outlines. Lay paper on top of dark fabric and sprinkle powdered chalk or cornstarch on the paper. Carefully lift the paper. Connect the dots using a marking pencil of your choice.
  • Make plastic stencils using stencil making tools of your choice
 
Post a comment
To comment on this article you must be logged in. Not a member?

USER COMMENTS

Report This User
pdf links
NONE of your online pdf links actually WORK either the photo is missing or you get a blank page or one of those 404 messages- this page cannot be found. You guys need to FIX THIS!!
May 25, 2009 at 06:01 AM

  • Connect



  • eNewsletter



  • Login




Login:

Forgot password?

 
© CKMedia. All rights reserved.
Magazine Subscriptions | Customer Service | Advertise | About CK Media | Contact | Privacy Policy | Terms of Use